Jump to year -> [1982] [1996] [1998] [2002] [2003]
[SI]: 60000 Instrumentation and Control Documents

Documents below are listed chronologically. Use the links on the left or below to filter documents by keyword. Use the links above to jump to a specific year on this page.

99 files

    1982---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  1. Instrumentation and Control, Course 136, OPG, 01/02/1982. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Course Index and Objectives 20042300.pdf (64 kb)
    - 136.00-12 Control Equipment Review 20042301.pdf (229 kb)
    - 136.00-2 Control Theory Review 20042302.pdf (491 kb)
    - 136.00-3 Control Mode Settings 20042303.pdf (224 kb)
    - 136.00-4 Introduction to Frequency Response 20042304.pdf (628 kb)
    - 136.00-5 Direct Digital Control of Processes 20042305.pdf (249 kb)
    2. 1996---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  2. Nuclear Power Plant Control & Simulaion, Course 3.4, by G. Bereznai, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Workbook, Chapter 1 - Modules A & B 20044401.pdf (644 kb)
    - Workbook, Chapter 2 - Modules A to F 20044402.pdf (3512 kb)
    - Workbook, Chapter 3 - Modules A to I 20044403.pdf (4141 kb)
    - Workbook, Chapter 4 - Modules A to D 20044404.pdf (2750 kb)
    - Workbook, Chapter 5 - Modules A to C 20044405.pdf (1554 kb)
  3. Digital Instrumentation & Control, Course 7.4, by M. MacBeth, Chulalongkorn University, 01/02/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Chapter 01 - CANDU DCC Features 20053301.pdf (237 kb)
    - Chapter 02 - Digital Control Concepts 20053302.pdf (317 kb)
    - Chapter 03 - Computer I/O Subsystems 20053303.pdf (423 kb)
    - Chapter 04 - Digital Ctrl Program Concepts 20053304.pdf (492 kb)
    - Chapter 05 - PHT P&IC Control Program 20053305.pdf (906 kb)
    - Chapter 06 - Steam Generator Level Control 20053306.pdf (727 kb)
    - Chapter 07 - Computerized Shutdown System 20053307.pdf (250 kb)
    - Chapter 08 - S/W Categorization Methods 20053308.pdf (233 kb)
    - Chapter 09 - General Display Requirements 20053309.pdf (349 kb)
    - Chapter 10 - Human Interface Design (HFE) 20053310.pdf (1014 kb)
    - Chapter 11 - HFE Methods 20053311.pdf (365 kb)
    - Chapter 12 - Work Assignment 20053312.pdf (173 kb)
    - Chapter 13 - Typical Design Guide Features 20053313.pdf (376 kb)
    - Chapter 14 - Typical HFE Eng. Program 20053314.pdf (421 kb)
    - Workbook 01 Module 01 - Introduction to Instrumentation 20053315.pdf (182 kb)
    - Workbook 01 Module 02 - ISA Symbols 20053316.pdf (94 kb)
    - Workbook 01 Module 03 - Pressure Instrumentation 20053317.pdf (122 kb)
    - Workbook 01 Module 04 - Level Instrumentation 20053318.pdf (249 kb)
    - Workbook 01 Module 05 - Flow Instrumentation 20053319.pdf (267 kb)
    - Workbook 01 Module 06 - Temperature Instrumentation 20053320.pdf (235 kb)
    - Workbook 01 Module 07 - Digital Computer Control 20053321.pdf (237 kb)
    - Workbook 01 Module 08 - Control Valves, Accessories 20053322.pdf (931 kb)
    - Workbook 02 Module 01 - Control Concepts 20053323.pdf (588 kb)
    - Workbook 02 Module 02 - Control Equipment 20053324.pdf (414 kb)
    - Workbook 02 Module 03 - Control and Process Considerations 20053325.pdf (371 kb)
    - Workbook 03 Module 01 - Level Control 20053326.pdf (566 kb)
    - Workbook 03 Module 02 - Pressure Control 20053327.pdf (203 kb)
    - Workbook 04 Module 01 - Log and Linear Ranges 20053328.pdf (96 kb)
    - Workbook 04 Module 02 - Log range detectors 20053329.pdf (126 kb)
    - Workbook 04 Module 03 - Linear Range Detectors 20053330.pdf (119 kb)
    - Workbook 05 Module 01 - Zone Level Control 20053331.pdf (216 kb)
    - Workbook 05 Module 02 - Reactor Regulating System 20053332.pdf (228 kb)
    - Workbook 05 Module 03 - Reactor Shutdown Systems 20053333.pdf (625 kb)
    - Workbook 05 Module 04 - Recovery from a Poison Outage 20053334.pdf (79 kb)
    - Workbook 06 Module 01 - Feed and Bleed Pressure Control 20053335.pdf (206 kb)
    - Workbook 06 Module 02 - Pressure Control by Pressurizer 20053336.pdf (111 kb)
    - Workbook 06 Module 03 - Heat Transport Bleed Control 20053337.pdf (245 kb)
    - Workbook 07 Module 01 - Unit Control Concepts 20053338.pdf (173 kb)
    - Workbook 07 Module 02 - Boiler Pressure Control 20053339.pdf (255 kb)
    - Workbook 07 Module 03 - Unit Startup 20053340.pdf (380 kb)
    - Workbook 08 Module 01 - Controller Tuning 20053341.pdf (189 kb)
    - Workbook 09 Module 01 - CANDU 9 Plant Control 20053342.pdf (182 kb)
  4. Reactor Control & Simulation, Course 3.3, by J. Koclas, Chulalongkorn University, 01/08/1996. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Chapter 0 - Title and Table of Contents 20044301.pdf (67 kb)
    - Chapter 1 - Point Kinetics 20044302.pdf (490 kb)
    - Chapter 2 - General Concepts 20044303.pdf (262 kb)
    - Chapter 3 - Power Measurement & Calibration 20044304.pdf (211 kb)
    - Chapter 4 - Power Error 20044305.pdf (193 kb)
    - Chapter 5 - Liquid Zone Control 20044306.pdf (134 kb)
    - Chapter 6 - Adjuster Rod Control 20044307.pdf (109 kb)
    - Chapter 7 - MCA Control 20044308.pdf (90 kb)
    - Chapter 8 - Shutoff Rods Extraction 20044309.pdf (35 kb)
    - Chapter 9 - Modal Flux Synthesis 20044310.pdf (83 kb)
    - Chapter 10 - Reactor Setback Program 20044311.pdf (66 kb)
    - Chapter 11 - Reactor Stepback 20044312.pdf (62 kb)
    - Chapter 12 - Shutdown Systems: SDS1 and SDS2 20044313.pdf (173 kb)
    - Chapter XX - Supplementary Materials 20044314.pdf (531 kb)
    - Workbook, Chapter 2 - General Concepts 20044315.pdf (331 kb)
    - Workbook, Chapter 3 - Power Measurement & Calibration 20044316.pdf (263 kb)
    - Workbook, Chapter 4 - Power Error 20044317.pdf (254 kb)
    - Workbook, Chapter 5 - Liquid Zone Control 20044318.pdf (159 kb)
    - Workbook, Chapter 6 - Adjuster Rod Control 20044319.pdf (125 kb)
    - Workbook, Chapter 7 - Mechanical Control Absorbers 20044320.pdf (94 kb)
    - Workbook, Chapter 8 - Shutoff Rods Extraction 20044321.pdf (46 kb)
    - Workbook, Chapter 9 - Modal Flux Synthesis 20044322.pdf (103 kb)
    - Workbook, Chapter 10 - Reactor Setback Program 20044323.pdf (85 kb)
    - Workbook, Chapter 11 - Reactor Stepback 20044324.pdf (80 kb)
    - Workbook, Chapter 12 - Shutdown Systems: SDS1 and SDS2 20044325.pdf (209 kb)
    5. 1998---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  5. IAEA CANDU Instrumentation & Control Course, by Mike MacBeth, IAEA, 18/09/1998. Doc type: Course.
    Summary: IAEA CANDU Instrumentation & Control Course, by Dr. Mike MacBeth (AECL), September 13 - 18, 1998, SNERDI, Shanghai
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Instrumentation Equipment 20041601.pdf (2847 kb)
    - Electronic Control 20041602.pdf (1680 kb)
    - Controller Tuning 20041603.pdf (510 kb)
    - Computer Input/Output Subsystems 20041604.pdf (484 kb)
    - Control Programs 20041605.pdf (810 kb)
    - Nuclear Instrumentation 20041606.pdf (518 kb)
    - Reactor Control and Protection 20041607.pdf (627 kb)
    - Heat Transport Control Systems 20041608.pdf (1415 kb)
    - Reactor Protection 20041609.pdf (712 kb)
    - Overall Unit Control 20041610.pdf (693 kb)
    6. 2002---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  6. Basic Instrumentation and Control Course, CNSC, 01/01/2002. Doc type: Course.
    Summary:
    Keywords: [Concept] Electrical, Instrumentation & Control [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Conceptual Function [Phase] Concept Design Operation [Audience] College Engineer Ugrad
    - Cover Page 20030400.pdf (87 kb)
    - 20030401.pdf (850 kb)
    - Pressure Measurement 20030402.pdf (350 kb)
    - Flow Measurement 20030403.pdf (391 kb)
    - Level Measurement 20030404.pdf (162 kb)
    - Temperature Measurement 20030405.pdf (209 kb)
    - Neutron Flux Measurement 20030406.pdf (282 kb)
    - Control 20030407.pdf (539 kb)
    - I&C Diagrams 20030408.pdf (98 kb)
    - Instrumentation Fondamentale 20070400.pdf (869 kb)
    7. 2003---------Jump to [Top] [Organization] [Concept] [SI] [Discipline] [Topic] [Phase] [Audience]
  7. What is RTD, RdF Corporation, 01/02/2003. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 60000 Instrumentation and Control [Discipline] Electrical Engineering [Topic] Function Physical Description [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - 20030701.pdf (198 kb)
---end of page---